[AI Ready Summit] Blueprint for a Company Where AI Works ~ The Correct User Manual for New Employee "AI"

October 15, 2026 (Thu) 9:50 a.m. - 4:05 p.m. October 16, 2026 (Fri) 9:50 a.m. - 4:05 p.m.

Don’t Make Manuals That End with “Created by AI”! The Optimal Solution for “Human × AI” Operation Leading to Usable Manuals ~ Leveraging AI: Tips for Prompt Design and Writing, and Systems for Search and Operation ~

October 6, 2026 (Tue) 2:00 p.m. - 3:00 p.m.

Registration ClosedTurning Word Manuals into Assets Usable by AI — How to Advance Manual Assetization Starting from Your Company's Current Position

September 1, 2026 (Tue) & September 3, 2026 (Thu) 2:00 p.m. - 2:45 p.m.

Registration Closed【Recorded Webinar】Feeling the Limitations of Word Manuals? — The First Step to Manual "Assetization" Starting with AsciiDoc/Markdown

July 22, 2026 (Wed) & July 23, 2026 (Thur) 2:00 p.m. - 2:45 p.m.

Registration ClosedFeeling the Limitations of Word Manuals? — The First Step to Manual "Assetization" Starting with AsciiDoc/Markdown

June 23, 2026 (Tues) & June 25, 2026 (Thur) 2:00 p.m. - 3:00 p.m.

Registration Closed【Co-hosted Webinar】Challenge to Zero Occupational Accidents – Four Perspectives to Evolve Safety Management in Manufacturing Sites –

May 12, 2026 (Tues) 1:00 p.m. - 2:15 p.m.

Registration ClosedReduce Internal Inquiries in Just One Hour! What Are the Requirements for a "Good Manual" in the AI Era?

May 12, 2026 (Tues) 2:00 p.m. - 3:00 p.m.

Registration ClosedThe Shortcut to Ensuring Accuracy in Back Office Operations and Eliminating Dependency on Individuals – Learning from Case Studies on How to Reduce On-Site Burden by Using Generative AI for Manual Maintenance –

March 10, 2026 (Tues) 1:00 p.m. - 2:00 p.m.

Registration ClosedWhat Is the Automated AI Proofreading Workflow? Key Points for Practical Use Compared with General-Purpose AI Services

Thursday, February 26, 2026, 2:00 p.m. – 2:50 p.m.

Registration ClosedGet Organized First! AI Utilization Starts with "Building the Foundation" – Learning from Case Studies: "Readable Documents" and Knowledge Utilization Systems –

February 19, 2026 (Thu) 4:00 p.m. - 4:45 p.m.

Registration ClosedHow to Create Web Manuals Built with Modernization – Production Workflow Utilizing Generative AI –

February 5, 2026 (Thu)
2:00 p.m. - 3:00 p.m.

Registration ClosedKnowledge Management Reform to Eliminate Personalization: Improving Knowledge Using Generative AI

December 9, 2025 (Tue)
4:25 p.m. - 4:45 p.m.

Registration Closed【Co-hosted Webinar】Challenge to Zero Occupational Accidents – Four Perspectives to Evolve Safety Management in Manufacturing Sites –

December 4, 2025 (Thu) 1:00 p.m. - 2:15 p.m.

Registration ClosedHow to Create Web Manuals Built with Modernization – A System That Is Easy to Build and Simple to Operate –

November 20, 2025 (Thu)
1:00 p.m. - 2:00 p.m.

Registration ClosedAnnouncement of Presentation at AI Market Focus | Successful Patterns for Utilizing LLM: From RAG × Agents × AI Ready Data to Business Integration

November 12, 2025 (Wed)
12:00 p.m. - 3:30 p.m.

Registration ClosedKnowledge Management Required for Manufacturing in the AI Era – Practical Methods for "Maintenance," "Sharing," and "Utilization" Supporting Skill Transfer –

October 9, 2025 (Thu)
1:00 p.m. - 2:00 p.m.

Registration Closed【Co-hosted Webinar】Challenge to Zero Occupational Accidents – Four Perspectives to Evolve Safety Management in Manufacturing Sites –

September 24, 2025 (Wed) 1:00 p.m. - 2:15 p.m.

Registration ClosedLedge.ai Webinar SP Day3: Announcement of the Presentation on "Creating" AI

September 26, 2025 (Fri)
2:35 p.m. - 3:15 p.m.

Registration ClosedHow to Create Web Manuals Built with Modernization – A System That Is Easy to Build and Simple to Operate –

July 10, 2025 (Tues)
14:00 - 15:00

Registration ClosedKnowledge Management Required for Manufacturing in the AI Era – Practical Methods for "Maintenance," "Sharing," and "Utilization" Supporting Skill Transfer –

July 29, 2025 (Tues)
3:00 PM - 4:00 PM

Reception Closed A Must-See for the Manufacturing Industry! Solve the Challenges of Skill Transfer with Generative AI × Manuals

June 19, 2025 (Thurs) 1:00 PM - 2:00 PM

Registration Closed Why haven't inquiries decreased even after publishing the FAQ? - Explaining the mechanism and content for self-resolution

April 17, 2025 (Thursday)
3:00 PM - 4:00 PM

Reception Closed Collaboration between TC and Generative AI - Business Efficiency with the Latest AI

February 27, 2025 (Thursday)
14:00 - 15:00

Reception Closed A Must-See for the Manufacturing Industry! Solve the Challenges of Skill Transfer with Generative AI × Manuals

Date: January 23, 2025 (Thurs), from 15:00 to 16:00

Registration ClosedManual Pro Talks! Case Study Seminar on Utilizing AI for Knowledge Sharing and Productivity Improvement ~ 2nd Edition: Efforts for Knowledge Sharing Using AI~

December 5, 2024 (Thurs)
12:00 PM - 1:00 PM

Reception Closed Seminar on Solving Quality-related Issues through the Use of Past Troubles, Manuals, and Generative AI

November 19, 2024 (Tues)
3:00 PM - 4:00 PM

Reception ClosedDon't fail! Towards the operation of a manual that is 'used' - Explaining the 'preparations' that lead to the successful introduction of a manual creation tool.

October 24, 2024 (Thurs)
12:00 PM - 1:00 PM

Reception ClosedHelp New Hires Hit the Floor Faster! The Frontline of Manual Improvement ~ Implement today! Improving employee performance through manual maintenance ~

November 7, 2024 (Thurs)
12:00 PM - 1:00 PM

Registration ClosedManual Pro Talks! Case Study Seminar on Utilizing AI for Knowledge Sharing and Productivity Improvement ~ 1st Edition: Efforts Towards Standardizing Document Creation Using AI ~

September 26, 2024 (Thurs)
12:00 PM - 1:00 PM

Reception ClosedDon't fail! Towards the operation of manuals that are 'used' - Explaining the 'preparations' that lead to the successful introduction of manual creation tools

Date: June 25, 2024 (Tues)
3:00 PM - 4:30 PM

Registration Closed[Archive Distribution] 2024 Latest Edition - What is an Easy-to-Search Manual Utilizing Generative AI? (Co-hosted Seminar with Helpfeel Inc.)

You can watch at your preferred timing.

Reception ClosedAnnouncement of the DX Promotion Conference for Manufacturing Companies Day 3: Design DX Day Exhibition

Date: May 23, 2024 (Thurs), from 11:30 to 12:00

Registration ClosedManual Pro Talks! Case Study Seminar on Utilizing AI for Knowledge Sharing and Productivity Improvement ~ 2nd Edition: Efforts for Knowledge Sharing Using AI~

Date: May 28, 2024 (Tues), from 15:00 to 16:00

Reception ClosedHelp New Hires Hit the Floor Faster! The Frontline of Manual Improvement ~ Implement today! Improving employee performance through manual maintenance ~

Date: May 21, 2024 (Tues)
3:00 PM - 4:30 PM

Registration ClosedManual Pro Talks! Case Study Seminar on Utilizing AI for Knowledge Sharing and Productivity Improvement ~ 1st Edition: Efforts Towards Standardizing Document Creation Using AI ~

Thursday, April 11, 2024
3:00 PM - 4:00 PM

Reception Closed2024 Latest Version - Easy-to-Search Manual Utilizing AI Generation

Date: April 17, 2024 (Wed), from 13:00 to 14:00

Reception Closed[Archived Distribution] Utilizing Manuals in the AI Era - Breaking Away from "Created but Not Used" - (Co-hosted Seminar by Helpfeel)

You can watch at your preferred timing.

Reception ClosedKnowledge Management in the AI Era - Approaches to Make Knowledge Easy to Understand and Find

Date: March 7, 2024 (Thurs), from 15:00 to 16:30

Reception Closed【Back Office Co-hosted Conference】~ Overcoming COVID-19 and Legal Revisions: What We Should Do Now ~ Announcement of Exhibition

February 15, 2024 (Thursday)
15:15 - 16:00

Reception ClosedDon't fail! Towards the operation of manuals that are 'used' - Explaining the 'preparations' that lead to the successful introduction of manual creation tools.

January 16, 2024 (Tues)
3:00 PM - 4:30 PM

Reception Closed Achieve with Add-in Tools! A Method to Balance Quality and Efficiency in PowerPoint Document Creation

December 5, 2023 (Tues) 3:00 PM - 4:30 PM

Reception ClosedRealized with Next-Generation Web Manuals! ～Building Management Update Flow with Modern Frontend × Documentation～

November 21, 2023 (Tues)
3:00 PM - 4:00 PM

Reception Closed Achieved through Tool × Manual Improvement! ～Steps from Standardization to Establishment that Managers Should Know～

November 7, 2023 (Tues)
3:00 PM - 4:30 PM

Reception Closed By organizing operations, automation becomes visible! Key points for successful RPA utilization

October 19, 2023 (Thurs)
3:00 PM - 4:30 PM

Reception ClosedThe keys to successful knowledge management are "ease of finding" and "ease of understanding"! ~Two approaches to connect data sharing to utilization~

Date: August 1, 2023 (Tues), from 15:00 to 16:30

Reception ClosedCreating a System for Utilizing Manuals with the Latest Tools - From the Introduction of Manual Creation Tools to Operation

Date: July 25, 2023 (Tues), from 15:00 to 16:30

Reception Closed Achieve with Plugin Tools! A Method to Balance Quality and Efficiency in PowerPoint Document Creation

July 12, 2023 (Wednesday)
15:00 - 16:30

Reception ClosedHow to Promote DX Leading to Overall Optimization - What Business Organization and Latest Tools Are Necessary for Promoting DX?

June 7, 2023 (Wednesday)
15:00 - 16:30

Reception ClosedWhy are manuals not used on-site? ～Steps from standardization to establishment that managers should know about～

Date: May 30, 2023 (Tues), from 15:00 to 16:30

Reception Closed Achieve knowledge management with the trending AI search engine! What is the latest case of call center DX and how did we reduce escalations by 60%!?

Date: May 17, 2023 (Wed), from 12:00 to 13:00

Reception ClosedRealized with the latest tools! Creating a system for manual operations aimed at organizational improvement

February 28, 2023 (Tues)
3:00 PM - 4:30 PM

Reception ClosedWhy are manuals not used on-site? ～Steps from standardization to establishment that managers should know about～

January 31, 2023 (Tues)
3:00 PM - 4:30 PM

Reception ClosedImprove CX with Increased Self-Resolution Rates! How to Systematize the Construction and Improvement of FAQs

January 26, 2023 (Thursday)
3:00 PM - 4:00 PM

Reception ClosedEasy-to-understand technical documents are the key to successful web services! If you want to create high quality and cost-effective solutions, choose Jamstack! – Learning from overseas examples, an approach to solving technical document challenges–

Thursday, December 15, 2022
2:00 PM - 3:00 PM

Reception ClosedWhy does knowledge management fail? ~Two steps to connect sharing to utilization~

November 29, 2022 (Tues)
3:00 PM - 4:30 PM

Reception ClosedBusiness Reform Realized through RPA Implementation - Introducing How to Promote Business Efficiency to Ensure RPA Success

November 8, 2022 (Tuesday)
3:00 PM - 4:30 PM

Reception ClosedAchieve efficiency in internal inquiry responses! – Solve the difficulty and confusion in finding know-how with "AI Chatbot" × "TC Method"!!–

Date: August 23, 2022 (Tues), from 15:00 to 16:00

Reception ClosedWhy are manuals not used on-site? ~Key points for manual adoption and operation that business improvement personnel should know~

Date: July 26, 2022 (Tues)
3:00 PM - 4:30 PM

Reception ClosedClear API references are the key to successful web services! We will teach you how to create high-quality and cost-effective technical documents!! Learn from international case studies to solve the challenges faced by documentation.

Friday, July 8, 2022
2:00 PM - 2:50 PM

Reception Closed Why does RPA work become a black box? Is "visualization of operations" necessary for effective RPA operation?! ~ Learning the tips for business automation with business organization & UiPath (RPA) ~

April 19, 2022 (Tuesday)
3:00 PM - 4:30 PM

Reception Closed Are you ready for the onboarding of new employees? ~ Key points for manual utilization and retention that educators should know ~

February 22, 2022 (Tues) 3:00 PM - 4:30 PM

Reception Closed Why are manuals not used on-site? ～Points on Manual Adoption and Operation that Business Improvement Personnel Should Know～

November 25, 2021 (Thursday) 15:00 - 16:30

Reception Closed Why does RPA work become a black box? Is "visualization of operations" necessary for effective RPA operation?! ~ Learning the tips for business automation with business organization & UiPath (RPA) ~

October 26, 2021 (Tues) 3:00 PM - 4:30 PM

Reception Closed Manufacturing Skills Transfer: Sharing knowledge and know-how is the first step to improving on-site capabilities! Solving the difficulty in finding and understanding documents with AI Search Engine × TC Method

October 12, 2021 (Tues)
2:00 PM - 3:00 PM

Reception Closed[Must-see for the Pharmaceutical Industry] Document Management Techniques to Promote Compliance with Rules and Processes - Recommendations for "Digitization and Electromagnetization" × "Systematic Organization and Manual Improvement"

Date: September 21, 2021 (Tues)
from 14:00 to 15:30

Reception Closed Why are manuals not used on-site? ～Points on Manual Adoption and Operation that Business Improvement Personnel Should Know～

Date: July 27, 2021 (Tues)
2:00 PM - 3:30 PM

Reception Closed High Speed! High Security! High Accessibility! A New Option for Website Development [Jamstack] ～A Modern Architecture that Maximizes SEO～(7/6)

Date: July 6, 2021 (Tues), from 15:00 to 16:30

Reception Closed Why does RPA work become a black box? Is "visualization of operations" necessary for effective RPA operation?! ~ Learning the tips for business automation with business organization & UiPath (RPA) ~

June 15, 2021 (Tuesday) 15:00 - 16:30

Reception Closed The forefront of internal knowledge utilization! A three-step approach to building a knowledge management system using AI search engines.

Date: April 27, 2021 (Tues), from 15:00 to 16:30

Reception Closed Why are manuals not used on-site? ～Points on Manual Adoption and Operation that Business Improvement Personnel Should Know～

Date: April 13, 2020 (Tues), from 15:00 to 16:30

Reception ClosedAchieve Increased Productivity! How to Successfully Organize Operations and Implement RPA

Date: March 2, 2020 (Tues)
1:30 PM - 3:00 PM

Reception ClosedWhat is Jamstack? - A New Corporate/Document Site in the COVID Era -

November 27, 2020 (Friday)
16:00 - 17:30

Reception Closed Accelerating with COVID-19, breaking free from task dependency by strengthening the "ability to elicit tacit knowledge" and the "ability to visualize operations"!

November 5, 2020 (Thursday)
13:30–15:00

Reception Closed Prepare for working styles with COVID-19! Achieve it with "Business Organization" × "IT Utilization"! How to promote information sharing starting with a small start - Co-hosted by Konica Minolta, Inc. -

October 21, 2020 (Wednesday) 14:30 - 16:05

Reception Closed A must-see for DX promotion personnel! What manuals are necessary for business transformation? How to create and review business manuals associated with system implementation.

September 29, 2020 (Tuesday) 14:30 - 16:05

Reception Closed A must-see for DX promotion personnel! What manuals are necessary for business transformation? How to create and review business manuals associated with system implementation.

August 26, 2020 (Wednesday) 14:30 - 16:05

Reception Closed Preparing for Work Styles with COVID-19
It's not too late! How to Organize Work to Enhance Telework Productivity

July 31, 2020 (Friday)
14:30–16:05

Reception Closed Preparing for Work Styles with COVID-19
It's not too late! How to Organize Work to Enhance Telework Productivity

June 25, 2020 (Thursday)
14:30 - 16:05

Reception ClosedWhy are business manuals not used? ~Visualizing business challenges that cannot be solved by the system alone~

May 14, 2020 (Thursday)
14:30 - 16:05

Reception ClosedWhy are business manuals not used? ~Visualizing business challenges that cannot be solved by the system alone~

March 27, 2020 (Friday)
14:30–16:05

Reception ClosedHow to Create and Review Manuals that Help Improve Operations

January 30, 2020 (Thursday)
14:30 - 16:05

Reception ClosedHow to Create and Review Manuals that Help Improve Operations

Thursday, December 5, 2019
14:30–16:05

Reception ClosedDocument Site Construction Using Markdown [Web Seminar]

October 25, 2019 (Fri)
2:00 PM - 3:00 PM

Reception ClosedDon't write suddenly! Start manual creation from visualizing business operations

September 26, 2019 (Thursday)
13:30–15:05

Reception Closed Video Manual Production and Operation Seminar - Communicating More Through Standardization & Video (7/24) [Co-hosted by Ebilly Co., Ltd.]

July 24, 2019 15:00–17:30

Reception ClosedHow to Start and Review Manual Creation Work - An Approach to Break Free from Personalization

Thursday, August 1, 2019
13:30–15:05

Reception ClosedHow to Start and Review Manual Creation Work - An Approach to Break Free from Personalization

Friday, May 31, 2019
13:30–15:05

Reception ClosedHow to Start and Review Manual Creation (1) [Writing Edition] (Tokyo)

March 1, 2019 (Friday)
13:30–15:05

Reception ClosedHow to Start and Review Manual Creation Services (Tokyo)

January 25, 2019 (Friday)
13:30–15:05

Reception ClosedGitHub×Markdown/AsciiDoc Manual Creation Seminar

November 9, 2018 (Friday)
13:30–14:45

Reception Closed Three Essentials for Effective Manuals - Establishing Standards, Utilizing Them, and Ensuring Their Adoption - (Tokyo, Shinjuku)

October 12, 2018 (Friday)
13:30–15:05

Reception Closed Three Essentials for Effective Manuals - Establishing Standards, Utilizing Them, and Ensuring Their Adoption - (Tokyo, Shinjuku)

July 13, 2018 (Friday)
13:30 - 14:30